Are your floors not looking up to the mark? Are your floors losing out on the shine and the appeal you installed them for in the first place? If yes, you certainly need to think about it. You certainly need to give your flooring a new life. Thinking as to what is the best way to do it? It is nothing but painting the floors again so as to bring back its lost beauty, shine, and appeal in no time! You have two options here.
Either you call a top floor painting professional and get the job executed to perfection or you take up the paint brush yourself! Well, if you ask us, painting the floors needs time, patience, skills, and definitely, the tools and all these things are best available to the professionals. Still, if you look forward to a D-I-Y approach, we wish you all the best and warn you against the following mistakes which most of the owner commit!
Do Not Commit These 4 D-I-Y Paint Floors WA Mistakes
1. Sealing the floor with PVA
PVA no doubt is good when it comes to priming a floor but it is not really the one needed for floor painting. An adhesion is blocked between floor paint and concrete when PVA is applied. This is good if one is looking to make the floor dust-proof but it should not be used as a paint primer. Depending on the condition of the floor, appropriate floor primer should be used.
2. Thick means durability
Most of the owners think that a thick coat will ensure durability. However, this is not the case as a thin application is required in order to correctly apply the coat since it is an air-drying product. If you apply thickly, the peeling and curing might not be that effective since the paint layer is not too strong for it.
3. One coat is enough to rejuvenate
When it comes to the number of coats, two coats are greatly recommended for one reason or the other. This is essential when painting a concrete floor as the first coat will simply penetrate and the absorption rate will vary as per the area of the room concerned. If a patchy finish is created, the wearing finish is hard to attain, greatly reducing the paint durability.
4. Prior floor washing is more than enough
According to the Paint Floors WA professionals, if you want the best painting results, you have to prepare the base well and simply washing is not going to fetch you that. You need to wash it first and sweep off any debris or dust that might be present there and then wait for the floor to dry. Apart from this, you are required to fill any holes or cracks that might be there in order to have a smooth floor painting.
No comments:
Post a Comment